This programme of work contains four interlined, cross-cutting elements and 16 programme goals. It is intended to assist Parties in establishing national programmes of work with targeted goals, actions, specific actors, time frame, inputs and measurable outputs. Parties may select from, adapt, and/or add to the activities suggested in the current programme of work according to national and local conditions and their level of development.
KBAs are sites that ‘contribute significantly to the global persistence of biodiversity in terrestrial, freshwater, and marine ecosystems’. KBAs are identified on the basis of species or ecosystems, according to five criteria and 11 subcriteria, all supported by quantitative thresholds. The KBA Global Standard details the criteria and subcriteria. KBA sites must meet one of the criteria and be clearly delineated. Proposed sites are independently reviewed and once accepted are included in the World Database of KBAs.
KBAs are normally identified by a KBA National Coordination Group (NCG). However, anyone with appropriate data may propose a site as a KBA, but they are they are encouraged to work with the NCG if one exists and consultation with relevant stakeholders at the local and national level is required and needs to be documented in the proposal. Where a KBA NCG has not yet been established, proposers submit a site proposal directly.
The Key Biodiversity Areas Partnership is composed of 13 leading international organizations including IUCN. It maintains a KBA Committee, Secretariat, a Technical Working Group, a KBA Consultative Forum, and the World Database of Key Biodiversity Areas. An independent KBA Standards and Appeals Committee has been established under the authority of the elected SSC and WCPA Chairs.
How to use
The governments of the world adopted the following definition of an OECM in 2018: “A geographically defined area other than a Protected Area, which is governed and managed in ways that achieve positive and sustained long-term outcomes for the in-situ conservation of biodiversity, with associated ecosystem functions and services and where applicable, cultural, spiritual, socio–economic, and other locally relevant values”. OECMs complement protected areas through sustained, positive conservation outcomes, even though they may be managed primarily for other reasons. These sites are documented in the World Database on OECMs. This definition was only recently adopted and most countries have not yet provided data, but this does not mean that no OECMs exist in those countries. The World Database on OECMs is available on the Protected Planet website.
How to use
For IUCN World Commission on Protected Areas (WCPA) guidance on recognising OECMs:
https://doi.org/10.2305/IUCN.CH.2019.PATRS.3.en
To search for information on an existing site on the World Database on OECMs:
https://resources.unep-wcmc.org/products/4c1733823f2a451e8d5ecbaaef3f1a06WDPA
The Convention on Biological Diversity’s Ecosystem Approach is a strategy for the integrated management of land, water, and living resources to promote conservation and sustainable use in an equitable way. It is the primary framework for such action under the CBD and it contains 12 core principles. The Ecosystem Approach Sourcebook contains a Beginner’s Guide, Advanced Guide, Tools and resources, a Case Study Database, and Operational guidance for applying the 12 principles of the Ecosystem Approach.
How to use
To access the EA Sourcebook and operational guides: https://www.cbd.int/ecosystem/
To download and subscribe to the CBD Ecosystem Newsletter: https://www.cbd.int/ecosystem/ea-newsletters/
Species360 is a non-profit NGO working in wildlife care to improve animal welfare and species conservation. It mobilizes a network of more than 1,300 aquarium, zoo, university, research, and governmental members in 102 countries. A central part of is the Zoological Information Management System (ZIMS), the world’s leading resource for the collection and sharing of data on animals, enabling ex situ institutions to manage their collections effectively and contribute valuable information to global conservation initiatives. ZIMS is the world’s most comprehensive knowledge database on more than 22,000 species. In 2022, Species360 expanded its mission to include flora and extend its operations to horticultural record-keeping, with the addition of Hortis – a specialized software for record-keeping and management of botanical collections.
How to use
Information on Species 360, ZIMS, and Hortis is available at: https://species360.org/about-us/about-species360/
To access Species 360 data it is necessary to register: https://species360.org/become-a-species360-member/
These Guidelines define terms and set out guidance on the justification, design, and implementation of any reintroduction or conservation translocation, including (i) reinforcement and reintroduction within a species’ indigenous range, and (ii) conservation introductions, comprising assisted colonisation and ecological replacement, outside a species’ indigenous range. The Guidelines focus on conservation translocations, namely a translocation that yields quantifiable conservation benefit. For this purpose, the beneficiaries should be the population or the ecosystem of the translocated species. Translocation needs rigorous justification. Feasibility assessment should include a balance of the conservation benefits against the costs and risks of both the translocation and alternative conservation actions. There are multiple risks in a translocation, affecting the focal species, their associated communities and ecosystem functions in both source and destination areas; there are also risks around human concerns. Any proposed translocation should have a comprehensive risk assessment.
How to use
Botanic Gardens Conservation International and the International Association of Botanic Gardens have jointly published the BGCI and IABG Recovery Manual for Plants to guide projects on plant species recovery. The manual sets out the aims and purpose of species recovery and the steps involved, and indicates good practice. The manual is aimed at conservation practitioners but also includes comprehensive bibliographic references, which enable more in depth reading on the topics covered.
The GSPC – A Plan to Save the World’s Plant Species – highlights the importance of plants and the ecosystem services they provide for all life on earth, and aims to ensure their conservation. The GSPC includes 16 targets for plant conservation. An updated GSPC was formally adopted at the 10th meeting of the Conference of the Parties to the CBD.
These guidelines are produced by the Agreement on the Conservation of African-Eurasian Migratory Waterbirds. The revised version includes Multi-Species Action as well as making AEWA Plans more implementable, accessible, and practical for implementing agencies. The guidelines also recognise the need for activities to be more targeted and aligned with the set objectives and goals.
The IUCN SSC Conservation Planning Specialist Group (CPSG) has developed several tools and resources to support planning. Teams are available to support this approach, including the use of modelling tools. Training in species conservation planning tools and processes is available through a combination of in-person and online courses. Training results in a certificate of completion. Extended mentoring opportunities also exist.
The One Plan Approach: requires that all available resources, all stakeholders and all populations of a species, are considered in conservation planning process. This approach is particularly effective at bringing together ex situ and in situ wildlife conservation practitioners and tools. Through CPSG, teams are available to support groups to apply this approach, which may include the application of the IUCN SSC Ex situ Guidelines as well as databases and modelling tools produced and maintained through key partners such Species360 and the Species Conservation Toolkit Initiative.
Population and Habitat Viability Assessment (PHVA): is a specific approach that integrates population viability analysis (PVA) into stakeholder-inclusive, multi-disciplinary planning projects. The PVA element helps all stakeholders to understand more a species’ life-history, threats, and the likely efficacy of potential conservation strategies. Facilitator-modeller teams are available through CPSG, to support groups to apply this approach.
Assess to Plan (A2P): is a process designed to bridge the gap between Red List assessment and conservation planning, for speciose groups. Using Red List data, assessors and other experts identify pathways to conservation action for taxa assessed as Threatened or Data Deficient. Outputs include recommendations for further planning or action for multi-species groups of taxa that can be expected to respond favourably to the same kinds of conservation action taken in the same areas and/or by the same groups of conservation actors.
This document was developed by the IUCN SSC Conservation Planning Specialist Group (CPSG) to build global capacity to save biodiversity and share and understanding of what effective species conservation planning looks like. The document contains 7 fundamental principles and 8 practical steps, and presents a succinct philosophy and framework for good species planning based on CPSG’s over 40 years of experience in species conservation planning. USER GUIDE SIMPLE AND CLEAR USER GUIDE TO THE BASIC PRINCIPLES AND PROCESS OF
The Biodiversity Indicators Partnership (BIP) is a global initiative to promote the development, delivery, and use of biodiversity indicators. Its primary role is to delivering indicators to monitor progress toward global and national goals and targets, such as those under the Convention on Biological Diversity, and the Convention on Migratory Species, Ramsar, and others. The BIP also supports indicators used in IPBES Assessment reports and for reporting progress towards Sustainable Development Goals. Indicators supported by the BIP are also used by national and regional governments.
How to use
The database has been developed by the IUCN SSC Species Monitoring Specialist Group with support from Re:wild. It includes 178 global data sources on: monitoring biodiversity state, pressures and threats; monitoring conservation responses to biodiversity loss, and those with multiple uses for biodiversity monitoring. A fact sheet answering frequently asked questions about the database is also available. The Species Monitoring Specialist Group is a voluntary network of experts from around the world and includes specialists on different species and taxa, on different monitoring techniques and issues, and on different types of data use. The group aims to enhance conservation by improving the flow of species data from collection point to decision-maker.
How to use
Version 3.0 of the database and the fact sheet can be downloaded at: https://www.speciesmonitoring.org/data-sources.html
A selection of Manuals, Guidelines and Methods Reviews is available at:
https://www.speciesmonitoring.org/guidelines-and-tools.html
To contact the Species monitoring Specialist Group: SpeciesMonitoring@gmail.com
